New Halogen-Free Cables from Kabelwerk EUPEN AG
Innovation for Low-Voltage Connections
Kabelwerk EUPEN AG is expanding its range of halogen-free cables with the new cable families EXGB Cca-s1,d2,a1 and EAXeGB Cca-s1,d2,a1. These cables fully comply with the recently revised NBN HD 603-5A standard (2023) and the updated technical regulations C1/107 from Synergrid, published at the end of August 2024.
Key Changes in the Technical Regulations
The updated version of technical regulation C1/107, published by Synergrid, serves as the basis for all low-voltage connections to the energy distribution network (DNB) in Belgium. The connection cable acts as the essential link between the street connection and the metering device.Approved cable types remain EXVB / EAXeVB for underground applications and BXB / BAXB for overhead installations.
Mandatory Use of Halogen-Free Cables
With the introduction of the new AREI regulations on June 1, 2020, the use of halogen-free cables (Euroclass Cca-s1,a1) has become mandatory for escape routes in buildings (such as stairwells and corridors) and for publicly accessible spaces with a capacity of at least 50 people, such as seminar rooms, sports halls, and auditoriums. As a result, the EXGB and EAXeGB cables, in compliance with the NBN HD 603-5A standard, are now also suitable for low-voltage connections.
Features of the New Cables
The EXGB Cca-s1,d2,a1 and EAXeGB Cca-s1,d2,a1 cables, approved by the Belgian DNBs and certified by CEBEC, can be installed both indoors and outdoors. They are suitable for open-air installation, with or without protection, and can be laid in the ground, in ducts, or in concrete.
Compared to the existing halogen-free cables in the “XGB” series, the new “EXGB” and “EAXeGB” cables offer significant improvements:
- Reinforced black outer sheath
- Enhanced water resistance
- Increased resistance to mechanical stress
For detailed information, please consult the technical datasheets available on our website or contact your usual representative.
Products:
- EXGB Cca-s1,d2,a1 0.6/1 kV
- EAXeGB Cca-s1,d2,a1 0.6/1 kV
You might also be interested in this:
-
Siemens - Revolution in Motion ControlRead moreYou are at the start of a new working week. While you are putting the finishing touches to an important project, a request comes in: the customer has a malfunction. The machine is down, but the deadline is approaching. You are asked to respond quickly.
-
Phoenix Contact - Click, click, doneRead moreIn the world of industrial automation, it is essential to have reliable and future-proof cable connections. The latest innovation, the M12 distributor boxes with Push-Pull quick-release fastening (SACB), is designed to meet this growing need. These distributor boxes are easy to install and offer maximum flexibility and reliability.
-
Leuze - The mini Safety Laser Scanner RSL200Read moreThe smallest scanner ever is now available, about the size of an orange: suitable for the highest safety level PLd/Cat.3/SIL2 and offering optimal ease of use, not only in stationary installations.
-
Rittal - Complete DirectRead moreRittal's Compleet Direct series offers a fast and flexible solution for IT environments where efficiency and reliability are key. Thanks to predefined configurations based on common market requirements, there is always a suitable enclosure solution available. The pre-assembled design saves time during installation and increases ease of assembly. This allows customers to experience a streamlined process from selection to commissioning. Translated with DeepL.com (free version)
-
Sekisui AlveoRead moreFoam producer Sekisui Alveo has a large factory in Roermond. To support production and maintenance, warehouses and distribution points with thousands of different items are spread across the various halls. Think spare parts, personal protection equipment and consumables. The company cooperates intensively with itsme for management, such as recently with the step-by-step introduction of vendor managed inventory (VMI) for the grab stock of mechanical items.
-
IECRead moreTo control the expansion of a silo park, engineering & construction company IEC called on Breemes. Being involved in the engineering from the beginning, the electrical service provider was able to make smart proposals for both the low-voltage part and the PLC control. ‘We have always been able to find each other well and when changes occurred, we were quickly on the same page with Breemes.’
-
Heliox - Charged for DeliveryRead moreHeliox, a developer and manufacturer of charging systems for electric buses and trucks, was already working with itsme when production still took place in the Netherlands. Today, production has shifted to Slovakia, Portugal, and Moldova, and is also happening in the US. itsme remains the “irreplaceable” partner for the supply of electrical components and cable harnesses.
-
BLOK System SupplyRead moreBlok System Supply and itsme have maintained an intensive relationship for many years. Early last year, this was further deepened with electronic data exchange via the Smart Connected Supplier Network. ‘It saves an enormous amount of time and reduces errors. We always have real-time information automatically.’ However, time for personal contact is not saved. ‘That is precisely what makes itsme a very nice party to work with.’