Earthing pipe clamp; Clamping/chucking range 17.5 | 114 mm; Material Brass; Surface protection Other; Cross section of the connecting conductors 2.5 | 16 mm

Used in conjunction with threaded couplers while driving threaded ground rods.

For use with DH Distance Holder and Spacer.

Strip earthing clip 3/8-1 1/2, A2, 1.4301

Braids in coil are mainly used for power distribution or earthing applications. Non-magnetic material. Tinned finish provides a theft-deterrent appearance.

Strip earthing clip 3/8-4, A2, 1.4301

Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 4-pole, 3+1 circuit for TN-S and TT systems Surge protection devices for protecting against overvoltage in electrical systems. As an importaRead more

For use with copper-bonded ground rods. Parts that are UL 467 Listed are suitable for direct burial in earth or concrete.

nVent ERIFLEX Connecting, Earthing and Neutral Busbars are used to connect several earthing conductors within a panel and can be used in a variety of different applications including switchgear and control equipment, eleRead more

BLITZDUCTOR XT base part for use as very space-saving and universal four-pole feed-through terminal for intrinsically safe circuits for the insertion of SPD modules, no signal interruption if the protection module is remRead more

Space-saving combined lightning current and surge arrester module with LifeCheck feature for protecting one pair of unearthed balanced interfaces with direct or indirect shield earthing. If LifeCheck detects thermal or eRead more

Two-pole DEHNrail modular surge arrester (type 3 according to EN 61643-1) consisting of a base part and plug-in protection module. High discharge capacity due to heavy-duty zinc oxide varistor / spark gap combination. FoRead more

For protecting end devices against transient overvoltages, meant for use as point-of-use protection for devices, test class III according to IEC 61643-1+A1, SPD-type T3 according to EN 61643-11, high upstream fuse ratingRead more

For protecting consumer systems against transient overvoltages caused by indirect lightning strikes and switching operations, test class II according to IEC 61643-1+A1, SPD-type T2 according to EN 61643-11, SPC-S-HK auxiRead more